TRION P1 LIDAR SCANNER TRAINING
1_How to assemble P1 Scanner
3_How to connect to P1 using STA & AP Mode
2_How to attach RTK Module on P1 Scanner
4_How to create scan project and initialize scan
5_How to scan with P1 Scanner
7_How to perform continue scanning
6_How to scan & collect control points
8_How to set up RTK integration for your P1 LiDAR Scanner
9_How to scan using the P1 with SR Module attached in PPK
11_Collect scan data for generating a camera calibration file
10_How to scan a manhole using the P1 with pole
12_How to configure NTRIP settings for RTK using P1 & SR mode
9_How to scan using the P1 with SR Module attached in PPK
14_How to set up NTRIP using P1 with SR and Emlid Base over caster
How to set up V10i as an NTRIP base station for P1
How to do continue scanning while scanning on the field, model software and continuous scanning optimization
How to troubleshoot if you mistakenly left LiDAR Sensor cover on while scanning
How to update your FJD Trion P1 Scanner firmware using firmware file
How to update your FJD Trion P1 Scanner firmware using Trion Scan App
HOW TO SCAN
UNBOXING AND FIRST START
INTRODUCING THE FJD TRION P1 LiDAR SCANNER
GET IN TOUCH
Our Address:
Address: 39 Belrene Street Rietondale, Pretoria 0186
Work Hours:
Monday - Thursday: 08:00 - 16:00
Friday: 08:00 - 14:00
Saturday, Sunday: Closed
Mail:
Telephone:
+27 12 493 0317
NOTE: Visit by appointment only