Reach RS2+
Multi-band RTK GNSS receiver with centimeter precision
GET YOUR FIX ON
Gets a fix in seconds
GPS, GLONASS, BeiDou, L1OF, L2OF, L1C/A, L2C,
Galileo, and QZSS E1B/C, E5b, B1I B2I
PPP support
Built in LTE modem
22 hours on 1 charge
Surveying with EmlidFlow
Point collection: save points, and export data to CSV
Formats
DXF, CSV, GeoJSON, ESRI Shapefile
Stakeout:
Find points' position on the ground
Stakeout is used to find exact physical locations of points. They can be collected in EmlidFlow or imported from other CAD or GIS software.
Process of stakeout in EmlidFlow has two steps: map view and bulls-eye. Map's purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match receiver and point.
Coordinate systems based on
WGS84, NAD83, GDA2020, and more
Logging in RINEX: record raw data, position, and base correction logs
Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. EmlidFlow has a simple and intuitive interface for logging configuration and control.
We provide our version of RTKLib for PPK. It’s free and can be requested. #EmlidStudio
16 GB storage. 160+ days of logging at 1 Hz
PPP for OPUS
RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
Connectivity
Real-time position
streaming in NMEA
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView3.
Reach can turn on and off automatically
Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor.
Compatible apps
eField for Android, FieldGenius for Android, ESRI Collector, QField, MachineryGuide, AgriBus-Navi, Efarmer, Agripilot, and others
Position streaming
Interfaces: RS-232, TCP, Bluetooth
NTRIP or another Reach
as a base station
Reach RS2+ works seamlessly with other Reach receivers over any link.
Input and output corrections
Interfaces: TCP, LoRa, Bluetooth, RS-232, NTRIP
Formats: RTCM3
Max distance from a base
Over 60 km in RTK 100 km in PPK Any place on Earth with PPP
Engineered
to be tough
Reach RS2+ is designed to work even in the most challenging environments.
IP67
RS2+ is waterproof up to 1 m depth. All connectors are completely sealed and protected from water and dust with silicone plugs.
-20 to +65 deg Celcius
We extensively tested Reach RS2+ in conditions that simulate coldest winters and hottest summers.
Poly-carbonate body
Polycarbonate, an extremely durable material that is used in bulletproof glass, makes Reach RS2+ impact-resistant.
Covered with
elastomer
Rugged
5/8″ mount
The metal mount works as a heatsink, transferring heat away from the electronic components and ensuring stable operation in a hot climate.
LoRa radio
868/915 MHz Frequency range
Up to 8 km At only 100mW
300% more range Compared with FSK radios at the same power
LoRa Spread Spectrum modulation can work on distances up to 4 times longer compared with traditional FSK radios at the same power output. This gives Reach RS2+ robust radio performance without sacrificing battery life. LoRa radio is used to connect rover to base when Internet-delivered corrections are not available.
Industrial battery
LiFePO4: Industrial battery that handles both high and low temperatures well
USB-C: Reach RS2+ charges from any USB port and power bank.
2 000+ cycles of charging and discharging while maintaining original capacity.
Reach RS2 works for up to 22 hours in static logging and up to 16 hours in RTK with cellular on. You don't need to worry about having spare batteries or replacing them in the field. Hot-swaps are a thing of the past.
Compact
and lightweight
128 х 142 mm Fits in a small bag
950 g Weighs less than a typical survey pole
Two receivers are required for centimeter precision
Single Reach RS2 can provide centimeter accuracy as well, but it needs NTRIP connection. For better understanding of RTK, PPK and NTRIP check the article on how these technologies work.
Reach RS2 Specifications
Reach RS2+
Multi-band RTK GNSS receiver with centimeter precision
Request Quote
How it works?
Enter in your details
Type in you're name and email. In the subject box type in QUOTE
Tell us which products should be added to your quote
Please indicate shipping address for an accurate quote. Feel free to ask any addition
Submit
When you are all done, click submit and you will receive your quote soon