SET UP FOR DIFFERENT SCENARIOS
1.RTK_Base and Rover over Lora Radio
2.RTK_NTRIP Rover
3.Setting up Base as your own NTRIP Station
4. Setting up preconfigured base to receive corrections as a Rover
5. Initialize IMU on RS3 Receiver
6. How to use different collection modes on EMLID Flow
7.Set-up precision limits
8.How to perform a base shift
MORE TRAINING
12. Reach RS3 Unboxing
Method used in:
Reach RS3 Unboxing
Instruments used:
Emlid Reach RS3.
Connection:
None
13. Reach RS2+/RS3 Complete Kit Set Up
Method used in:
How to do a Topographical Survey
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
14. Initializing IMU
Method used in:
Setting up your Reach RS3/RS2+ Complete Surveying Kit
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
15. Communication via UHF using external Radio
Method used in:
Configure Reach RS3/RS2+ to communicate via UHF using an external radio
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
16. Setup to transmit corrections through UHF
Method used in:
Setting up your Reach RS3/RS2+ Complete Surveying Kit
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
17. How to setup Reach RS3 tilt position to third party application: eField
Method used in:
Configure Reach RS3/RS2+ to communicate via UHF using an external radio
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
18. Setup base over known point
Method used in:
Setting up your Reach RS3/RS2+ Complete Surveying Kit
Instruments used:
Emlid Reach RS2+ Base and Reach RS3 Rover.
Connection:
RTK
PREV: SET UP FOR DIFFERENT SCENARIOS
1.RTK_Base and Rover over Lora Radio
Method used in:
Most situations, at a site with a medium size and terrain. No internet connection needed.
Instruments used:
Emlid Reach Base and Rover
Connection:
Lora Radio
2.RTK_NTRIP Rover
Method used in:
Urban or outskirts area. Good and stable internet connection needed.
Local NTRIP or TRIGNET service provider used to receive connections to rover.
This method is also used when you are uncertain about the size of your terrain.
Local NTRIP or TRIGNET service provider used to receive connections to rover.
This method is also used when you are uncertain about the size of your terrain.
Instruments used:
Emlid Reach Rover
Connection:
NTRIP over Internet
3.RTK_Creating own NTRIP caster in RTK
Method used in:
A big site, with uneven terrain and no line of site. Active internet connection needed.
Instruments used:
Emlid Reach Base and Rover
Connection:
Your own NTRIP Caster over Internet
4.PPK Stop and go_Base and rover
Method used in:
A large site with dense vegetation and very steep slopes. No LoRa Radio range through the entire site.
Instruments used:
Emlid Reach Base and Rover
Connection:
5.PPK Stop and go_Rover
Method used when:
You only have one GNSS receiver, and your site doesn't have an active internet connection.
Instruments used:
Emlid Reach Rover
Connection:
Your own NTRIP Caster over Internet
6.PPK Stop and go_Drone and rover
Method used in:
You have a rover and a drone with a PPK kit, and your site has no internet connection
Instruments used:
Emlid Reach Rover & drone with a PPK Kit.
Connection:
7.RTK_Rover with Drone
Method used in:
You only have one rover and a RTK drone
Instruments used:
Emlid Reach RS2 Rover with a dji Phantom 4 RTK Drone and RTK Controller
Connection:
Drone and Base communication
8.RTK_Drone only
Method used in:
You only have a RTK drone. You are not able to stake out or measure ground control points (GCP's).
Instruments used:
dji Phantom 4 RTK Drone and RTK Controller
Connection:
Network
9.PPP
Method used in:
You have no internet connection, and also no connection to a local NTRIP or Trignet station.
Instruments used:
Emlid Reach base.
Connection:
PPP
10. Reach RS2 x Mavic 3
Method used in:
When using a RS2 base station with a Mavic 3 ENT RTK Drone
Instruments used:
EMLID Reach RS2 Base, dji Mavic 3 ENT RTK Drone
Connection:
Mavic 3 Ent and RS2 communication
11. Volume Calculations using the Reach RS2
Method used in:
When doing volume calculations
Instruments used:
Emlid Reach RS2 & Reach RS2+.
Connection:
Reach RS2+ Base and RS2 Rover communication